$906.78 USD
See more details
Description
Take your FPV experience to the next level with the BETAFPV Pavo20 Pro II 4S O4 Pro, a 2.2-inch cinewhoop drone designed to combine power, agility, and stability for freestyle flying and cinematic footage.

Equipped with LAVA 1104 5500KV motors, a Cube 2-4S 30A flight controller, and the DJI O4 Air Unit Pro digital transmission system, it delivers precise responsiveness, excellent maneuverability, and an immersive FPV experience with high-definition video.

Its reinforced frame, RGB lighting, and ExpressLRS 2.4GHz receiver make it an excellent choice for pilots seeking performance and versatility in a compact design.

This combo includes one BETAFPV LAVA II 4S 680mAh battery, designed to deliver powerful and consistent energy output, providing up to 10 minutes and 30 seconds of flight time under test conditions.

Key Features

  • Freestyle-optimized power: features LAVA 1104 5500KV brushless motors and Gemfan D2.2 three-blade propellers, delivering an excellent combination of thrust, stability, and responsiveness.

  • DJI O4 Air Unit Pro system: enables HD digital video transmission and high-quality aerial footage, ideal for FPV flying and cinematic recording.

  • Cube 2-4S 30A flight controller: integrates an STM32G473 processor and a 30A ESC for precise control and fast response during demanding maneuvers.

  • ExpressLRS 2.4GHz receiver: provides an efficient, low-latency communication system for reliable drone control.

  • Compact and lightweight design: features a 93.9 mm wheelbase and an approximate weight of 116.2 g with the O4 Pro system installed, excluding the battery.

  • Reinforced Pavo20 Pro II frame: built with durable PA12 propeller guards and a simplified assembly system for easier maintenance.

  • Anti-vibration O4 Pro mount: designed to improve camera stability during recording, with an adjustable tilt angle from 0° to 40°.

  • Screw-secured propellers: provide secure attachment, reducing the risk of propellers coming loose during demanding maneuvers.

  • Extended flight time: delivers up to 10 minutes and 30 seconds of flight using the LAVA II 4S 680mAh battery, according to the manufacturer's test conditions.

  • Integrated buzzer: makes locating the drone easier after a crash or landing in hard-to-reach areas.

  • GPS-ready design: includes mounts compatible with various GPS modules, allowing additional functionality with proper installation and configuration.

  • NightFire RGB lighting: features an LED strip with 10 lighting effects and 7 colors, improving visibility and orientation during flight.

  • ND filter compatibility: supports ND8, ND16, and ND32 filters for the DJI O4 Pro camera, allowing greater control over exposure.

  • Optimized configuration: includes pre-tuned PID settings for DJI O4 systems, making adjustments through the OSD easier.

Compatibility with Remote Controllers and FPV Goggles

The BETAFPV Pavo20 Pro II 4S O4 Pro supports different FPV control and viewing systems, offering flexibility for pilots who already own ExpressLRS or DJI equipment.

Compatible remote controllers:

  • Radio controllers using the ExpressLRS (ELRS) 2.4GHz protocol.

  • DJI FPV Remote Controller 3, through the DJI O4 Pro system and compatible goggles.

  • DJI FPV Remote Controller 2, through the DJI O4 Pro system and compatible goggles.

Compatible FPV goggles:

  • DJI Goggles 3

  • DJI Goggles N3

  • DJI Goggles 2

  • DJI Goggles Integra

DJI remote controller and goggles combinations:

  • DJI Goggles 3 / Goggles N3 + DJI FPV Remote Controller 3.

  • DJI Goggles 2 / Goggles Integra + DJI FPV Remote Controller 2.

Important: To use DJI FPV remote controllers, the SBUS protocol must be properly configured in the flight controller. ELRS controllers operate through the integrated ExpressLRS receiver. Compatibility may require firmware updates and device pairing.

Technical Specifications

  • Brand: BETAFPV

  • SKU: 0795986632351

  • Version: 4S O4 Pro ELRS 2.4G

  • Type: FPV Cinewhoop

  • Propeller Size: 2.2 inches

  • Wheelbase: 93.9 mm

  • Flight Controller: Cube 2-4S 30A 3IN1 FC

  • Processor: STM32G473

  • ESC: 30A

  • Motors: LAVA Series 1104 Brushless 5500KV

  • Propellers: Gemfan D2.2 3-Blade

  • Video System: DJI O4 Air Unit Pro

  • Receiver: Serial ExpressLRS 2.4GHz

  • DJI Control Protocol: SBUS

  • Frame: Pavo20 Pro II Brushless Frame

  • PNP Version Weight: 72.6 g

  • Weight with DJI O4 Pro: 116.2 g (excluding battery)

  • Battery Connector: XT30

  • Battery Compartment: 29 mm wide, with no specified height limit

  • Lighting: NightFire RGB LED Strip

  • Camera Mount: O4 Air Unit Pro Bracket

  • Camera Tilt Angle: 0° to 40°

  • Maximum Advertised Flight Time: 10 minutes and 30 seconds with LAVA II 4S 680mAh battery

Included Battery: BETAFPV LAVA II 4S 680mAh

This combo includes a LAVA II 4S 680mAh battery, designed to provide consistent power delivery and extended flight time during freestyle and cinematic flying.

Its advanced Z-Folding technology optimizes energy density and reduces internal resistance, allowing efficient discharge even during high-demand maneuvers.

Battery Features

  • High discharge capability: 95C rating for fast and powerful responsiveness.

  • Z-Folding technology: promotes higher energy density and stable current delivery.

  • Improved performance: offers a 26.7% increase in discharge rate compared to the previous 75C generation.

  • Extended flight time: its 680mAh capacity enables up to 10 minutes and 30 seconds of flight under the manufacturer's test conditions.

  • Updated design: distinctive green and yellow finish.

Package Contents

  • 1 BETAFPV Pavo20 Pro II 4S drone with DJI O4 Air Unit Pro and ELRS 2.4GHz receiver

  • 1 BETAFPV LAVA II 4S 680mAh battery

  • 4 Gemfan D2.2 3-blade propellers

  • 1 USB Type-C to SH1.0 adapter

  • 1 SH1.0 4-pin adapter cable

  • 1 SH1.0 6-pin HD cable (100 mm)

  • 1 NightFire RGB LED strip (500 mm)

  • 2 5.8GHz VTX antennas

  • 1 5.8GHz VTX antenna mount

  • 1 GPS bracket (22 × 22 mm)

  • 1 GPS bracket (14 × 17 mm)

  • 2 GPS foam pads

  • 1 H1.5 hex screwdriver

  • 1 DJI O4 Air Unit Pro user manual

The BETAFPV Pavo20 Pro II 4S O4 Pro ELRS 2.4G combines power, DJI digital technology, and a compact design to deliver agile, stable, and cinematic FPV flights. Compatible with various remote controllers and FPV goggles, and including a LAVA II 4S 680mAh battery, it is an excellent choice for taking your flying experience to the next level.